This line of 21 unitized, low intensity u-tube heaters ranges in capacity from 40,000 to 250,000 Btu/hr and in total heater length of 17' to 27.5', providing optimum flexibility to meet exact industrial or commercial building heating requirements. The u-tube configuration of these heaters offers a large radiating surface for more uniform heat distribution at the floor level. These models are especially suited for lower mounting heights and may be mounted horizontally or up to an angle of 45°. In addition, the self-contained draft inducer can be rotated up to 90°, adding to the installation flexibility.

A line of 82 unitized straight tube heaters with more than 26 different configurations offers optimum flexibility in custom designing an infrared heating system. Ranging in capacity from 40,000 to 250,000 Btu/hr, these heaters are from 15' to 80' long and may be used in straight, L-shape, U-shape, or Z-shape configurations. For added versatility, 90° elbows and corner reflectors are available on most of the units for close area mounting near walls, doors, or corners. The LTS series is design certified for up to 50' of fresh air inlet duct and up to 75' of horizontal sidewall venting. In addition, the LTS series is certified for a unique incline mount, which allows the heaters to be mounted following the contour of the roof for maximum space utilization.

These series, with more than 80 different configurations and in capacities from 40,000 to 250,000 Btu/hr, offer optimum flexibility in custom designing an infrared heating system. The ETS series is available in multiple configurations (straight, L, Z, and expanded U-shape) with lengths from 15' to 80' long. For added versatility, 90° elbows, corner reflectors, and side reflectors are available for close area mounting near walls, doors, and corners.The ETU series is available in seven different configurations and provides more uniform radiant heat energy distribution. The ETU series is ideal for high heat loss areas and spot heating.

Available in capacities of 150,000 and 175,000 Btu/hr, these compact heaters are completely factory assembled and may be mounted at various heights, horizontally or up to an angle of 90°. These powerful units incorporate many of the features standard for other Space-Ray tube heaters and are especially suited for higher mounting heights. This series meets a wide range of comfort heating needs, indoors or outdoors.

The DK Series is a line of 14 ceramic heaters in capacities from 30,000 to 160,000 Btu/hr, four in propane gas and ten in natural gas. Suitable for horizontal mounting or angled up to 35°, this series can meet a variety of spot and area heating requirements.

At Space-Ray, industrial comfort is a challenge we take seriously. We have been manufacturing gas-fired infrared heating systems since 1958. The quality and performance of our heaters are based on over 40 years of field experience and exposure to industrial/commercial heating problems. Our reputation is built upon a solid track record for providing highly radiant efficient, easy to install and high quality infrared heating equipment. A new compact size energy efficient infrared gas tube heater is now available for use in residential and light commercial buildings. The Space-Ray Cold Blocker industrial strength infrared heater is made especially for residential garages, workshops or virtually any small unheated space. It's compact size (only 9 feet 3 inches in overall length) allows placement in those small, hard to heat areas where longer tube heaters could not previously be used.

SRB: Space-Ray designed the original radiant gas brooder for use in Europe over 40 years ago. Our emphasis was then, as it is today, on quality and fuel efficient performance. Performance you can rely on. When it comes to products reliability and fuel efficient operation, Space-Ray Radiant Gas Brooders have withstood the test of time.40,000 BTU/HR Model SRB40 Provides Fuel Efficient, Radiant Gas Heat For A Variety Of Poultry Applications 3-Year Limited Warranty On Complete Emitter Assembly 4 Control Options To Fit Your Individual Needs Factory Pre-Assembled Components For Quick Installation Patented Wind Buster Pilot* Designed For Use In Tunnel Ventilated Houses Maintenance Friendly Design Allows Easy Access To Pilot And Main Burner Orifices Easy Leveling, Low Profile Mounting Bracket

SSJ Series: Single Jet Brooder with Heating Capacity Of 30,000 BTU/Hr. (8.8 kw). Factory Pre-Assembled Components For Ease Of Assembly And Installation. 46" Aluminum Canopy Selection As Standard For Superior Reflectivity. Maintenance Friendly Stainless Steel "Wind-Buster" Pilot System For Flame Stability And Dependable Ignition Each Brooder Is Individually Tested For Safety Stainless Steel Main Burner Gas Line For Strength And Durability. Main Burner Head Made From Solid Brass For Added Strength. Easy Leveling Low Profile Mounting Bracket. Multiple Control Options Including Zone, Modulating, Or Individual Thermostat Control.

SHP17P:High Pressure Brooder with Unique round design efficiently spreads more fuel saving radiant heat over a broad circular area Stainless steel canopy adds extra strength - especially helpful if brooders are to be relocated Ideal replacement for other types of high pressure brooders Orifice Holder is easy to clean and wash down No electricity is required Stainless steel burner system modulates from low burn to high burn as needed for increased fuel efficiency Two orifice system with unique pressure adjustment capability can maintain clean combustion at both input levels No air filter needed. Brooder features a unique double gas burner system that combusts dust and carbon to help prevent buildup. (For extremely harsh environments, an air filter is available as an accessory.)

CTA/CTS Series An Energy Efficient Tube Radiant Heating System That Saves Fuel, Reduces Maintenance, And Permits Higher Mounting ,Unique Pull Through System For Greater Safety And More Even Tube Temperatures ,Colorized Aluminized Steel Emitter Tubes* For Corrosion Resistance And Greater Radiant Output ,Heavy-Duty Cast Iron Burners For Long Life ,Unique Diagnostic Monitoring Lights Show When Heater Is Operating And Assists With Fault Diagnosis ,Tube Lengths From 30' to 50' & BTU Input Ratings from 80,000 to 125,000 BTU/Hr. Can Be Used In A Vented Or Indirect (Unvented) Mode. Available In either Natural Or Propane Gas Models.

Push-through tube heater with its patent pending Tube Integrity Safety System, TISST, Calorized aluminized steel emitter tubes* for corrosion resistance and greater radiant output. Heavy-duty cast iron burners for long life. Unique diagnostic monitoring lights show when heater is operating and assists with fault diagnosis. Tube lengths from 20' to 60' and BTU input ratings from 75,000 to 150,000 BTU/Hr. Optional Cold Air StopperT stops cold or hot air from entering the poultry house when the heaters are not in operation and helps to reduce sweating problems. (Not available on the 150,000 BTU/Hr. model)