Convector Radiation
Beacon-Morris Convectors are engineered for both forced hot water and two-pipe steam heating system installation with heating elements of lightweight non-ferrous construction.They are available in (7) basic types to meet a wide range of heating applications in institutional buildings, hospitals, hotels, office buildings, schools, apartments and other structures. A variety of cabinet enclosure styles permits the selection of an attractive and functional installation to blend with any building interior -modem or traditional.
Designed for maximum flexibility of installation arrangement, Beacon-Morris Convectors are available in free-standing, semi-recessed, wall hung and fully recessed models. Enclosures are formed from heavy-gauge steel, and finished in prime coat for complete protection against corrosion during shipment and providing a base for final finish to meet architectural requirements after installation.

Types of Convectors

Type FS-A/FSG-A:  
The type FS-A Free-Standing Cabinet Enclosure is designed to be used exposed and fitted flush against the wall.
Readily installed without alteration of wall interior, The FS-A enclosure is frequently used for system modernization where it is desirable to avoid the expense of recessing the unit in the wall. Arched inlet shown is standard.
Unit may be provided with integral inlet grille,(FSG-A).

Type W-A:  
The W-A Convector is a completely exposed wall hung unit with flat top.
Outlet grille is in the face of the enclosure. Enclosure front wraps around unit and fastens to sides of cabinet with clips. Air inlet is through open bottom of unit enclosure.

Type SR-A/SRG-A Semi-Recessed:  
Cabinet design is similar to FS-A model. Enclosure projects only 2 1/4" from wall.
Complete unit includes enclosure, front panel with outlet grille and arched inlet opening, heating element.
Front panel is easily removed for cleaning or access to heating element.
Unit may be provided with integral inlet grille, (SRG-A).

Type PW-A/PWG-A:  
This is a partially recessed unit with rounded flange front and venetian type air outlet grille, standard for wall mounting as illustrated. Cabinet extends only 2 1/4 " from wall.
Enclosure front fastens and screws to brackets on unit liner installed in wall recess.
Air inlet is through open bottom of unit (PW-A).
Unit may be provided with integral inlet grille, (PWG-A).

Type SF-A/SFG-A:  
The Type SFA Free-Standing Cabinet Enclosure is designed to be used exposed and fitted flush against the wall.
 Readily installed without alteration of wall interior, the SF A enclosure is frequently used for system modernization where it is desirable to avoid the expense of recessing the unit in the wall. Arched inlet shown is standard.
 Unit may be provided with integral inlet grille,(SFG-A).

Type SW-A:  
This model is fully exposed wall hung with outlet grille located in sloping top.
Enclosure wraps around unit and fastens to sides with clips. Air inlet is through open bottom of unit.
Slope of top is 30°. Consult factory for availability with stainless steel.

Type RF-A/FRG-A & FWG-A:  
Designed to be fully recessed within the wall. The flanged edge metal front contains the outlet grille and inlet opening and is fastened by screws. It is easily removable for heating element access.
The standard unit is arranged for floor mounting with arched inlet opening, (RF-A).
Unit may be provided with integral inlet grille (RFG-A shown). TYPE FWG-A unit is similar, but for wall mounting with integral inlet grille. All units extend 13/16" from wall.
Consult factory for availability of FWG-A models in stainless steel.