Residential Air Handler Units

Air Handler Units Toronto

Ecologix

Combo-Pac, CP Series

In heating mode, the micro-processor automatically controls the airflow to provide greatest comfort and quietest operation that meets the space heating demand. This provides longer heating cycles for greater comfort and improved air circulation. In cooling mode, the control continuously measures room conditions and adjusts fan speed to deliver the ideal amount of cooling and dehumidification. Automatically compensates for varying heat loads and humidity levels.

Optional Heat Strips
Dealer-installed heat strips add supplemental heat on extremely cold days.

 

Fully modulating ECM blower with load matching control strategy and active humidity control in cooling.

 
Model Heating Capacity Air Flow Size (Tons)
CP30 30 - 48 MBH 800 CFM 1.5 - 2
CP60 60 – 95 MBH 1400 CFM 2.5 - 3.5
CP75 43000 MBH 72 – 113 MBH 4 - 5
 

Download Specs (PDF)

Air Handler Units - Ecologix
 

 

High efficiency ECM motor for electrical savings. Up to two heating speeds and up to six cooling speeds selectable by the installing contractor. Compatible with all 24-volt thermostats.

ECO-Pac, EP Series

Benefits

  • Variable speed EC motor for energy efficiency and noise reduction
  • Higher energy efficienct EC motor
  • Flexible to accommodate a variety of options for adding cooling
  • Simple installation, easy access to parts for service and maintenance
  • Versatile to allow installation in most orientations

Features

  • Ultra-high efficiency EC motor
  • Up to five cooling airflow selections and dehumidification option in cooling mode
  • Includes integral hot water coil, pump, check valve and field-installed filter rack and filter
  • Multi-positional: upflow, downflow, and horizontal; return air can be from back, right, left, or bottom

 

Variable ECM blower speed control with malty-stage heating.

 
Model Heating Capacity Air Flow Size (Tons)
EP30-EC 21 – 30 MBH 800 CFM 1.5 - 2
EP40-EC 32 – 72 MBH 900 CFM 3
EP60-EC 43 – 95 MBH 1200 CFM 3
EP65-EC 47 – 103 MBH 1400 CFM 3.5
EP75-EC 55 – 122 MBH 2000 CFM 5
EP100-EC 76 – 164 MBH 2000 CFM 5
 

Download Specs (PDF)

Ecologix residential air handler
 

 

Three independently selectable fan speeds for each operating mode: heating, cooling and continuous run. Compatible with all 24-volt thermostats.

Thermal-Pac, TP Series

Benefits

  • Easy to customize fan speeds to match requirements of home
  • Simple installation, easy access to parts for service and maintenance
  • Versatile to allow installation in most orientations

Features

  • Three independent fan speeds available for heating, cooling, and continuous fan (through relay controls)
  • Includes integral hot water coil, pump, check valve and field-installed filter rack and filter
  • Multi-positional: up flow, down flow, and horizontal; return air can be from back, right, left, or bottom

 

On/Off control system, independently select speed for heating, cooling and continuous fan

 
Model Heating Capacity Air Flow Size (Tons)
TP30 28 – 48 MBH 800 CFM 1.5-2.0
TP60 58 – 95 MBH 1300 CFM 2.0-3.5
TP75 75 – 12 MBH 1900 CFM 2.5-5.0
 

Download Specs (PDF)

Residential Air Handler Units
 

 

DXAH Heat Pump Air Handler

Unit mounts in any direction: up, down, horizontal discharge left or right. Return air can be mounted on left or right side, bottom, or back of unit. Small dimensions allow ceiling mounting or mounting above a water heater. Optional Hydronic or electric heating coil slide out front for easy servicing.

Benefits

  • Variable speed EC motor for energy efficiency and noise reduction
  • Deliver heat directly to air stream from heat pump, without need for an additional hydronic heat exchanger and pump
  • Versatile to allow installation in most orientations
  • Simple to add backup heating option

Features

  • Ultra-high efficiency EC motor
  • Includes DX coil ready for direct connection to heat pump
  • Tall cabinet has integral “A” coil. Separate slab coil on small cabinet
  • Optional hydronic or electrical back up heating module

 

Direct Expansion (DX) air handlers for connection to a heat pump

 
Model Heating Capacity Air Flow Size (Tons)
DXAH18 18000 MBH 600 CFM 1
DXAH24 24000 MBH 800 CFM 1.5
DXAH36 27346 MBH 1200 CFM 3
DXAH60 48026 MBH 1700 CFM 5
DXAH72 57438 MBH 2200 CFM 6
 

Download Specs (PDF)

 

 

HPAH Heat Pump Air Handler

Unit mounts in any direction: up, down, horizontal discharge left or right. Return air can be mounted on left or right side, bottom, or back of unit. Small dimensions allow ceiling mounting or mounting above a water heater. Optional hydronic or electric heating coil slide out front for easy servicing.

Benefits

  • Simple installation, easy access to parts for service and maintenance
  • Large coil to accommodate delivery of heat at water temperatures of as low as 110 F
  • Variable speed EC motor for energy efficiency and noise reduction
  • Versatile to allow installation in most orientations
  • Versatile to allow installation in most orientations
  • Simple to add backup heating option

Features

  • Includes hot/chilled water coil, pump, check valve and field-installed filter rack and filter
  • Coil has large surface area
  • Ultra-high efficiency EC motor
  • Tall cabinet has integral “A” coil. Separate slab coil on small cabinet.
  • Multi-positional: upflow, downflow, and horizontal; return air can be from back, right, left, or bottom.
  • Optional hydronic or electrical back up heating module.

 

Heat pump air handlers with chilled/hot water coil for connection to a heat pump or storage tank.

 
Model Heating Capacity Air Flow Size (Tons)
HPAH30 22000 MBH 840 CFM 2.5
HPAH60 43000 MBH 1200 CFM 5
HPAH100 74000 MBH 2100 CFM 8
HPAH120 80000 MBH 2400 CFM 10
 

Download Specs (PDF)

 

 

Zone Comfort Systems, ZC –Zone Comfort

Three (3) independent zones and compact duct system designed to quietly deliver heating and cooling when and where you need it. Tight temperature control by zone increases comfort and eliminates hot and cold areas in the home. Self-contained unit comes complete with all controls and integrated zone dampers to reduce installation cost. Use three conventional Heat/cool thermostats Utilizes Ecologix Small D Duct system or can be connected to existing conventional duct systems for furnace replacement.

Externally mounted cooling coil allows flexible air handler mounting.(vertical, horizontal, upside down)

Tall cabinets available for use with cooling “A” coils. Improved comfort with smaller condensing unit.

Reduced peak electrical loading during A/C season. Fan automatically runs at lowest possible speed to meet demand and ensure virtually silent operation. High Efficiency EC Motor Compatible with all standard humidifiers, 4 inch pleated filters and electronic air cleaners.

 

Premium system with three (3) independent zones of comfort. Variable ECM blower speed control with multi-stage heating.

 
Model Heating Capacity Air Flow Size (Tons)
ZC-18 28 – 48 MBH 800 CFM 1.5
ZC-24 55 – 95 MBH 1200 CFM 2
ZC-30 56 – 95 MBH 1200 CFM 2.5
ZC-36 61– 104 MBH 1400 CFM 3
ZC-42 61– 104 MBH 1400 CFM 3.4
ZC-48 71– 122 MBH 2000 CFM 4
ZC-60 71– 122 MBH 2000 CFM 5
ZC-100 91- 164 MBH 2000 CFM 6
 

Download Specs (PDF)

 

 

Zone Comfort Tall Systems, ZCT – Zone Comfort

Benefits

  • Achieves more even temperature distribution floor to floor. Delivers heat/cool only to where it is needed, reducing energy costs. Equipment is compact and simple to install.
  • Variable speed EC motor for energy efficiency and noise reduction
  • Allows a variety of options for add-on cooling
  • More “grid-friendly” power consumption
  • Virtually silent operation
  • Simple installation, easy access to parts for service and maintenance

Features

  • Built-in zone dampers and control for three zones
  • Ultra-high efficiency EC motor
  • Externally mounted cooling coil
  • Reduced peak electrical loading during A/C season
  • Fan will run at lowest possible speed to meet demand
  • Includes integral hot water coil, pump, check valve and field-installed filter rack and filter

 

Premium system with three (3) independent zones of comfort. Variable ECM blower speed control with multi-stage heating.

 
Model Heating Capacity Air Flow Size (Tons)
ZC-18 28 – 48 MBH 800 CFM 1.5
ZC-24 55 – 95 MBH 1200 CFM 2
ZC-30 56 – 95 MBH 1200 CFM 2.5
ZC-36 61– 104 MBH 1400 CFM 3
ZC-42 61– 104 MBH 1400 CFM 3.4
ZC-48 71– 122 MBH 2000 CFM 4
ZC-60 71– 122 MBH 2000 CFM 5
ZC-100 91- 164 MBH 2000 CFM 6
 

Download Specs (PDF)