QUIETSIDE Tankless Water Heater/Boilers - DPW Models

QUIETSIDE Tank less Water Heater/Boilers
Three capacities - 99,000, 120,000 and 199,000 Btu/h are available.
These units have efficiency levels of 90% AFUE on the heating operation and an energy factorof up to 0.85 for DHW production.  These outstanding efficiency levels are achieved by utilizing two heating exchangers, including a wet recuperative heat exchanger.  This heat exchanger condenses extra energy from the hot flue gas to provide additional performance and energy.These units are capable of being vented in Schedule 40 PVC.                                          

 QUIETSIDE Tankless Water Heater/Boilers - ODW Models

Ever taken a cold shower? Ever wanted to spend an extra 5 minutes in the shower but the water is getting colder? Ever wanted to reduce your gas utility bill? Now you can with the Quietside Tankless Water Heater. Quietside tankless water heaters are Energy Star approved and one of the leaders in condensing tankless water heaters sold in North America. Conceived 5 years ago, and refined through a rigorous testing program, these tankless water heaters are at the pinnacle of performance and efficiency, producing at 12% higher efficiency than even the current Energy Star standard tankless water heaters. Quietside tankless water heaters qualify for many State Utility rebates and the new Federal Energy Tax Credit Program allowing up to 30% of the installation cost (maximum $1,500.00) as a tax credit in 2009 & 2010. High efficiency is only one of the benefits.

Exactemp Water Control
Performance without control is useless. The Quietside tankless water heater uses our revolutionary Exactemp control to keep the delivered water temperature within 2°F of the set point at all times. Three temperature sensors measure the tankless water temperatures throughout the unit. The first measures the incoming water temperature. This information together with the actual flow rate of water through the tankless water heater is fed to the microprocessor, allowing the tankless water heater to calculate the performance required from the gas valve. The second temperature sensor monitors the tankless water temperature leaving the S Line Heat Exchangers. This is always 10 to 20°F higher than the required set point, allowing the Bypass Temperature control valve to open and bleed just the right amount of the cold incoming water into the leaving water to blend it down to within 2°F of the temperature set point on the remote controller. The last temperature sensor measures the delivered tankless water temperature just prior to the water leaving the unit. This ensures that the water temperature at the shower or faucet is an “Exactemp”.

Easy Installation
Quietside’s tankless water heater solves these problems for you. The S Line Heat Exchangers reduces the flue gas temperatures to approximately 130°F allowing the use of Schedule 40 PVC (SLC636 in Canada) flue and intake piping. Up to 45 equivalent Feet of 3” or 4” venting with a maximum of 3 elbows can be used to vent these units. Not only is Schedule 40 PVC (SLC636 in Canada) simple to work with, it attaches directly to both the vent connections on the units and to the termination kit (provided). It is also a fraction of the cost of the Stainless venting required on other Tankless units. No longer does the venting cost as much as the tankless water heater. Easy, quick, low cost, and hassle free venting can be done both vertically and sidewall. Everybody agrees that using an Isolation Valve kit is the best way to install a Tankless Water Heater. So does Quietside, however to make it the standard, Quietside is happy to provide an Isolation Valve kit, plus ASME Pressure Relief valve with every tankless water heater. Servicing and Maintenance just got a whole lot easier. Confused with all the accessories available for these Tankless units? Quietside provides the Termination kit and the Isolation Valves with the unit. The only accessory you need to worry about is our easy to install LP gas conversion kit. .Don’t forget: The Quietside tankless water heater is now backed by our 12 year Heat Exchanger and 5 year Parts warranty, plus Technical Support and training programs recognized as some of the best in the industry.

What’s inside the Quietside tankless water heater ?
With features such as our unique S-Line Heat Exchangers, Exactemp Technology, a Modulating Gas Valve, an innovative Microprocessor that controls all of water heater’s functions and the ability to use Schedule 40 PVC (SLC636 in Canada) venting materials over stainless steel, the Quietside tankless water heater is not your ordinary Tankless. . .