BRADFORD WHITE Water Heater IGI- IGE 10N

Residential Gas Ever Hot Thankless Water Heater
Features:
Continuous Flow- Supplies hot water continuously at the temperature set point.
Heat Exchanger- Nine pass design to maximize heat transfer and efficiency.
Remote Control- Interior models have a primary control integrated into the face of the water heater. Exterior models are shipped with a primary remote controller. For both interior and exterior models up to two controllers can be hardwired at multiple locations. Provides 96º-160ºF. Optional controls provide 96º -120ºF setting.
Direct Electronic Ignition- No standing pilot.
Very Low Noise Level- 49dB.
Fully Automatic Controls- Outgoing water temperature is monitored by a built-in sensor. Burner and combustion blower modulate between minimum and maximum input to maintain setpoint temperature. If the temperature of the water exceeds 6 degrees above the set point temperature the burner will shut down. The burner will ignite once outgoing water temperature falls below the set point.
 Interior and Exterior Models- Self regulating inputs, Interior Models=15,000-180,000 Btu's, Exterior
Models=15,000-199,000 Btu's.
Diagnostic Controls- Error messages in numerical codes are displayed on primary control.
Cut Energy Waste- Models only run when there is a demand for hot water.
Space Saving Installation- compact size for tight installations (mounts on the wall).
Lime Accumulation Sensor- built into heat exchanger, alert of build-up.
Venting (interior model)- can be vented horizontally through a wall or vertically through the roof. Maximum equivalent vent length is 41 ft. Vertical venting maximum height is limited to 21 ft. Maximum of 3 elbows (vertical and horizontal). Interior models have dedicated venting system components that must be ordered separately

 BRADFORD WHITE Water Heater IGI- IGE 5N

Commercial Gas Ever Hot Thankless Water Heater
Features:
Continuous Flow- Supplies hot water continuously at the temperature set point.
Heat Exchanger- Nine pass design to maximize heat transfer and efficiency.
Remote Control- Interior models have a primary control integrated into the face of the water heater. Exterior models are shipped with a primary remote controller. For both interior and exterior models, only one controller can be used. Provides 96º-180ºF. Optional controls provide 96º-120ºF setting.
Direct Electronic Ignition- No standing pilot.
Very Low Noise Level- 49dB.
Fully Automatic Controls- Outgoing water temperature is monitored by a built-in sensor. Burner and combustion blower modulate between minimum and maximum input to maintain setpoint temperature. If the temperature of the water exceeds 6 degrees above the set point temperature the burner will shut down. The burner will ignite once outgoing water temperature falls below the set point.
Interior and Exterior Models- Self regulating inputs, Interior Models=15,000-180,000 Btu's, Exterior
Models=15,000-199,000 Btu's.
Diagnostic Controls- Error messages in numerical codes are displayed on primary control.
Cut Energy Waste- Models only run when there is a demand for hot water.
Space Saving Installation- compact size for tight installations (mounts on the wall).
Lime Accumulation Sensor- built into heat exchanger, alert of build-up.
Venting (interior model)- can be vented horizontally through a wall or vertically through the roof. Maximum equivalent vent length is 41 ft. Vertical venting maximum height is limited to 21 ft. Maximum of 3 elbows (vertical and horizontal). Interior models have dedicated venting system components that must be ordered seperately.
Five year limited warranty on heat exchanger. Five year limited warranty on parts.