AtlasCare logo

Duct Foil Wrap Insulation

Duct foil wrap Insulation

All 48″ wide rolls, 3/4 lb density fiberglass with FSK Foil facing
Sold Per Roll
1-1/2″ (R4.2) = 400 sqft / roll (100′ long x 4′ Wide)
2″ (R5) = 300 sqft / roll (75′ long x 4′ wide)
3.5” (R12) = 200 sqft / roll (100′ long x 4′ wide),
Temperature limit = 250F degrees
Thermal and acoustical properties
For external insulation, suitable for irregular shaped ductwork Ideal for surfaces where temperature and condensation must be controlled.
Applied with plier gun, staples, aluminum foil tape, and self-stick pins

Rigid Fiberglass Board

24″ x 48″ sheet with FSK foil face.
Sold Per Box.
1″ = 96sqft/box, 1-1/2″ = 64sqft/box, 2″=48sqft/box
3lb density fiberglass board
Temperature limit = 450F degrees
Thermal and acoustical properties
Very adaptable Versatile product used for various thermal and acoustical applications (heating and air conditioning ducts, power and process equipment, boiler and stack installations, etc.) Applied with stick pins, perforated pins, or weld pins (weld gun needed)

3M™ Fire Barrier Duct Wrap

proven alternative to 1- and 2-hour fire resistant rated shaft enclosures for grease ducts
Lightweight and thin, for ease of installation and space saving, while allowing custom installation applications with multiple layers where needed
Butted inner layer in 2-layer grease duct applications
Zero clearance to combustible throughout the entire enclosure system
Thin, lightweight and flexible, 3M™ Fire Barrier Duct Wrap 615+ provides excellent insulating capabilities and offers a space-saving alternative to traditional bulky fire protection methods obtained through a gypsum wall shaft or enclosure. This wrap is commonly used in commercial kitchen grease ducts, as well as ventilation ducts.

Pipe Sleeve Insulation

Designed as a ready to use, energy efficient insulation blanket specifically produced for circular air duct insulation.
Provide an excellent method to reduce heat loss and condensation build-up.
Many local building codes now dictate that any warm air ducting passing through an open or unheated space must be insulated.
Suitable for use with heating, ventilation and air conditioning systems.

HVAC FOR LIFE Sheet Metal know how much busy you are and as part of our plan to reduce your shopping time we brought in a wide range of hardware and Fastenal’s to make your shopping easier for both, custom sheet metal and hardware.

Sheet Metal Screws, S & D Cleats, Standing S, Unistrut 10 Gage, U channels, Angle bars, Hanger straps, Duct sealant, threaded rods, Duct tap, Beam clamps, Ceiling flanges, Duct sealant.

Aluminum foil wrap insulation, Fire wrap insulation. Aluminum Foil Tap, Fire Stopper, Aluminum Flex Pipes Insulation sleeves.

Request Quote

We offer the latest Duct Foil Wrap Insulation technology.