Commercial kitchen exhaust
Hood:
All canopy hoods are constructed of 16 and 18 gauge steel. Joints are welded liquid tight without seams, utilizing an automatic wire feed welder. Deluxe System - 100% Stainless Steel, All are UL 710 listed
All canopy hoods are built to exacting standards and are in accordance with NFPA 96 and NSF specifications. Grease trough, made from lightweight aluminized steel, is engineered to receive grease extracted by the filters which are the baffle type, 20" wide and carry a UL listing. All hoods are pre wired for quick installation.
For more information on our standard canopy hoods contact us , by phone 1-905-624-3854
Box Exhaust Canopy:
- All hoods are constructed of 16 and 18 gauge steel.
- All joints are welded liquid tight, without seams by an automatic wire fed mig welder.
- All hoods are built in accordance to NFPA 96, NSF specifications, & U.L. 710 specifications.
- Grease trough is made to receive grease extracted by filters.
- Grease filters are of baffle type (20'' wide) and carry a U.L. listing.
- They are made from a light weight aluminum steel.
- A stainless steel cup attaches to the tray that runs beneath the entire length of the hood.
Box Make-Up Air Canopy
- All hoods are constructed of 16 and 18 gauge steel.
- All joints are welded liquid tight, without seams by an automatic wire fed mig welder.
- All hoods are built in accordance to NFPA 96, NSF specifications, & U.L. 710 specifications.
- Grease trough is made to receive grease extracted by filters.
- Grease filters are of baffle type (20'' wide) and carry a U.L. listing. They are made from a light weight aluminum steel.
- A stainless steel cup attaches to the tray that runs beneath the entire length of the hood.
Box Make-Up Air Canopy With Bottom Registers
- All hoods are constructed of 16 and 18 gauge steel.
- All joints are welded liquid tight, without seams by an automatic wire fed mig welder.
- All hoods are built in accordance to NFPA 96, NSF specifications, & U.L. 710 specifications.
- Grease trough is made to receive grease extracted by filters.
- Grease filters are of baffle type (20'' wide) and carry a U.L. listing. They are made from a light weight aluminum steel.
- A stainless steel cup attaches to the tray that runs beneath the entire length of the hood.
Low Ceiling Box Exhaust Canopy
- All hoods are constructed of 16 and 18 gauge steel.
- All joints are welded liquid tight, without seams by an automatic wire fed mig welder.
- All hoods are built in accordance to NFPA 96, NSF specifications, & U.L. 710 specifications.
- Grease trough is made to receive grease extracted by filters.
- Grease filters are of baffle type (20'' wide) and carry a U.L. listing. They are made from a light weight aluminum steel.
- A stainless steel cup attaches to the tray that runs beneath the entire length of the hood.
Request quote: Fill a quote request
|
|
|
Financing